EzeAs Mould and Mildew Remover: Your Safe Solution for Septic/Grey Water Systems!

How to Safely Combat Mould and Mildew, without Jeopardising Your Environment!


Mould and mildew: the pesky duo that seems to love our wet spaces more than we do! Thankfully, EzeAs Products has come to the rescue with a revolutionary Mold & Mildew Remover that not only promises ease of use, but also assures compatibility with septic/grey water systems. For our eco-conscious Aussie homeowners, this is brilliant news! Before you dismiss this as 'too good to be true', let’s delve into the details.

The EzeAs Way to a Sparkling Clean Space

Mouldy silicone seals and grimy grout can make a bathroom look older than it is. Enter, EzeAs Mold and Mildew Remover. With a staggering 98% success rate, this is the product your bathroom has been waiting for. Here’s why:

  • No Scrubbing: Gone are the days of strenuous scrubbing sessions. Just apply, wait and wipe.
  • Protect Your Pocket: Why go for expensive silicone and grout replacements when you can rejuvenate what you already have?

Why it's Safe for Septic/Grey Water Systems

Your environmental concerns are valid. After all, what’s the point of a sparkling clean bathroom if it’s at the cost of Mother Nature? Here’s the lowdown on why EzeAs is your eco-friendly mould and mildew solution:

  1. It's a Gel: Runoff is negligible. Give it a good shake before using, and its active ingredients stay safely encased.
  2. The Blocking Technique: With a simple drain plug or paper towel, you ensure minimal contact with the septic or grey water systems.
  3. Dry Application: This product works best on dry surfaces. A dry application ensures minimal runoff, to begin with.
  4. Extra Protective Measures: EzeAs offers a handy 'Fixing Tape' or, alternatively, use cling wrap to cover the gel. This ensures maximum effectiveness, with minimum environmental impact.

Steps to Eco-Friendly Mould and Mildew Removal

Using EzeAs Products Mold & Mildew Remover, while also caring for your septic/grey water system, is a cinch. Here’s how:

  1. Prep Your Surface: Ensure the area is competely dry.
  2. Block the Drain: Use a plug or paper towel.
  3. Apply the Magic: Place a 3ml bead of gel on the targeted area.
  4. Seal it In: Use the EzeAs Products Fixing Tape or cling wrap.
  5. Wait for the Transformation: Depending on the severity, leave it on for 6 to 48 hours.
  6. The Final Touch: Remove the tape or wrap, wipe with paper towels, followed by a clean wet cloth, and let it dry.


With EzeAs Products Mold & Mildew Remover, you’re not just choosing a product that gives you squeaky clean surfaces; you’re choosing one that respects your environmental concerns. So, the next time you spot that unsightly mould, remember, there’s an easy and eco-friendly way out!

Ready to give your wet spaces the EzeAs touch? Click Here to purchase now and see the difference for yourself!

See the following article for further technical information on EzeAs Products ingredients.